Search for planning and housing data
5,605 results
Dataset:
-
Typology type: Policy
U0120719Landscaping Implementation
Following the commencement of the development and before 30th September of every year during the implementation period (either phased or in full) and 5 year aftercare period, a 'Landscaping Implementation Report' shall be prepared by a suitably qualified landscape architect and / or contractor, and submitted by the developer to the Local Planning Authority in order to demonstrate that the landscaping has been carried out in full accordance with the approved landscaping details. The report should record the landscaping operations carried out on the land since the date of commencement, or previous report / aftercare meeting, and set out the intended operations for the next 12 months. It shall cover the following matters in particular, but not limited to, species, size, location, planting and aftercare specification, and be illustrated with evidence such as an overall progress summary, inspection site visit notes, a schedule of maintenance operations undertaken, before and after photos of any remedial plantings or completed works. If required, the developer shall arrange to attend a site meeting with the Local Planning Authority to inspect the planting and ongoing maintenance requirements.
- Dataset
- Planning condition
- Reference
- U0120719
-
Typology type: Policy
U0120720Noise
The development shall be provided with a Mechanical Ventilation with Heat Recovery (MVHR) system throughout, and no trickle vents shall be fitted to any windows. All studio apartments and bedrooms throughout the development shall be provided with glazing rated at least 45 dB Rw+Ctr and with octave band sound reduction values of at least 32 dB Rw at 63 Hz and 28 dB Rw at 125 Hz. All remaining habitable rooms (living/kitchen spaces) shall be provided with enhanced double glazing rated at least 30 dB Rw+Ctr. Internal noise levels due to mechanical ventilation plant shall not exceed 26 dB(A) in bedrooms and 30 dB(A) in living rooms. A commissioning report demonstrating compliance with the above shall be submitted for approval to the LPA, prior to first occupation of the flats, and occupation shall not be permitted until such report is approved.
- Dataset
- Planning condition
- Reference
- U0120720
-
Typology type: Policy
U0120721Waste Management
Prior to first occupation, the developer shall submit for approval to the local planning authority in writing, a scheme for the management and storage of waste. All such requirements of the approved scheme shall be implemented prior to occupation and subsequently complied with. The applicant shall have regard to City of Doncaster Council's Technical & Developer Requirements Supplementary Planning Document section 18 for best practice when designing the development's waste management scheme.
- Dataset
- Planning condition
- Reference
- U0120721
-
Typology type: Policy
U0120722cycle storage
Prior to occupation of the development hereby approved, details of secure, enclosed cycle storage facilities for each individual property of the development shall be submitted to and approved in writing by the local planning authority. These facilities shall be fully implemented and made available for use prior to the occupation of the development and shall thereafter be retained for use at all times in accordance with those approved details.
- Dataset
- Planning condition
- Reference
- U0120722
-
Typology type: Policy
U0120724plans
The development hereby permitted must be carried out and completed entirely in accordance with the terms of this permission and the details shown on the approved plans listed below: 3936-02J - Proposed
- Dataset
- Planning condition
- Reference
- U0120724
-
Typology type: Policy
U0120725Windows and doors
Prior to commencement of relevant works details of any new and/or replacement windows and doors/gates shall be submitted to and approved in writing by the Local Planning Authority. Details shall be provided for each window and door type and windows to be fully working vertically sliding sash windows unless otherwise agreed in writing by the Local Planning Authority. Windows to be white/off-white and doors/gates to be black or a traditional dark colour. Works shall be carried out in accordance with approved details.
- Dataset
- Planning condition
- Reference
- U0120725
-
Typology type: Policy
U0120726Roof trusses
Prior to commencement of relevant works details of the retention of roof trusses shall be submitted to and approved in writing by the Local Planning Authority. Works shall be carried out in accordance with approved details.
- Dataset
- Planning condition
- Reference
- U0120726
-
Typology type: Policy
U0120727Insulation
Any wall insulation should be internal and designed to limit the risk of interstitial condensation.
- Dataset
- Planning condition
- Reference
- U0120727
-
Typology type: Policy
U0120728Brickwork
Prior to commencement of relevant works details of making good of brickwork following the insertion of new doors and removal/remodelling/blocking of existing openings including the removal of the stone cladding to the current front door to the property shall be submitted to and approved in writing by the Local Planning Authority. The blocking of openings shall be in recess. Samples of the bricks to be used in blocking up of openings, the making good of brickwork, to form the bin enclosure and to be used for the new walls shall match existing and be provided on site for the inspection of and approved in writing by the Local Planning Authority. Works shall be carried out in accordance with approved details.
- Dataset
- Planning condition
- Reference
- U0120728
-
Typology type: Policy
U0120729Roof
Prior to commencement of relevant works samples of any replacement roof covering shall be provided on site for the inspection of and approved in writing by the Local Planning Authority. Any replacement of covering shall be natural slate to match existing. Works shall be carried out in accordance with approved details.
- Dataset
- Planning condition
- Reference
- U0120729